New Releases from IPC Training
Click on links below for free complete online reviews. Free paper-based testing or automated e-testing included with most programs.
DVD-71C IPC-A-610E Common Inspection Errors
Help your operators and inspectors avoid the costly mistakes involved in misinterpreting the IPC-A-610 acceptance criteria. See the free pre-test to find out if they are falling prey to these common errors. Also available as OVT-71C, for playback over your learning network.
A-620A-IL A-620A Illustrations (Clip Art)
Choose any of the 618 individual images from Rev. A of the IPC/WHMA-A620, Requirements and Acceptance for Cable and Wire Harness Assemblies standard. Build your own in-house training programs or reference documents. Discounts on quantity purchases.
A-610E-IL A-610E Illustrations (Clip Art)
Purchase individually, by the chapter, or by complete set. Useful for all multimedia training purposes and as visual aids within company standards. Each image is in high resolution / full color - suitable for print or electronic display.
DVD-64C Component Identification (Upgrade)
Updated to include the latest package styles – covers all the major through-hole and surface mount components. This training program also explains the function of component types, reference designators, markings, orientation and polarity. Also updated and available as OVT-64C, for playback over your learning network.
DVD-74C ESD Control for Electronics Assembly
Certify your electronics assembly operators as "ESD Safe" by two major
electronics associations. (See our sample certificate.) This joint
collaboration between IPC and ESDA -- the Electrostatic Discharge
Association -- covers static electricity generation, triboelectric
charging, ESD failure models and techniques to control ESD, including
personal grounding, controlling static charges in the work area, and proper
handling, packaging and transporting of ESD sensitive devices per the
S20.20 ESDA specification. Also available as OVT-74C, for playback over
your learning network.
DVD-PTH-E Through-Hole Solder Workmanship Standards
Select from Class 2 and/or Class 3 acceptance criteria for a thorough
review of the visual requirements for component side, barrel and solder
side of through-hole solder joints. Details min./max. dimensional criteria
from the latest revision (Rev. E) of the IPC-A-610 and J-STD-001 industry
standards. Explains product classes, solder joint terminology and common
soldering defects. Also available as OVT-PTH-E, for playback over your
learning network.
DVD-SMT-E Surface Mount Solder Workmanship Standards
Covers workmanship standards for dimensional criteria of surface mount
solder joints -- such as End Overhang, Side Joint Width, Fillet Height,
etc., for Chips, J-Leads and Gull Wing components. Includes both Class 2
and 3 requirements from Rev. E of the IPC-A-610 and J-STD-001 industry
standards. Provides for defect identification on such undesirable
conditions as Solder Balls, Blowholes, Solder Webbing, Chip-Outs,
Non-Coplanarity, Incomplete Reflow, and more. Also available as OVT-SMT-E, for playback over your learning network.
DVD-18C Soldering Terminals
Shows your operators how to properly solder wires to the terminals commonly
used in electronics assembly, including: turret, cup, bifurcated, hook and
pierced terminals. Includes proper wire wrapping techniques, using a
solder heat bridge for effective heat transfer, soldering for
inspectability and evaluation of acceptable and unacceptable solder joints
in accordance with the latest IPC-A-610E / J-STD-001E acceptance standards.
Also available as OVT-18C, for playback over your learning network.
DRM-PTH-E Through-Hole Evaluation Training & Reference Guide
Use in the classroom or on the shop floor, this compact spiral-bound manual
make it easy for your inspectors and operators to make the right acceptance
decisions for through-hold solder joints. Help your operators to better
understand the minimum acceptable requirements for vertical fill, wetting
of lead, land and barrel and contact angle -- to IPC-A-610E and J-STD-001E
industry standards. Includes defect section and all three classes of
product. See our free PDF review through the link above.
DRM-SMT-E Surface Mount Evaluation Training & Reference Guide
Contains computer-generated color illustrations of Chip, J-Lead and Gull
Wing solder joints, clearly showing the minimum acceptable condition for
each type of component misalignment, with details of all the specifications
for minimum/maximum solder joint size, including fillet heights and lengths
-- to IPC-A-610E and J-STD-001E industry standards. See our free PDF review
through the link above.
P-PTH-E Through-Hole Solder Joint Evaluation Wall Posters
Make a big impression with these full-color, 20 x 28-inch (51 x 71 cm) wall
posters that define minimum/maximum through-hole solder joint acceptance
requirements from Revision E of the IPC-A-610 and J-STD-001 industry
standards. Choose one poster each for Class 2 or Class 3.
P-SMT-E Surface Mount Solder Joint Evaluation Wall Posters
Inspection is everyone's job, and nothing says it better than these Surface
Mount Evaluation Wall Posters. One poster each for the 3 basic component
types: Chips, J-Leads and Gull Wings. At 20 x 28-inch (51 x 71 cm) in
size, these posters go a long way to demonstrate acceptability criteria
from Revision E of the IPC-A-610 and J-STD-001 industry standards. Choose
three posters each for Class 2 or Class 3.
DVD-15C Soldering Iron Tip Care
Shows your technicians how to properly care for soldering iron tips –- and
avoid many of the pitfalls associated with lead-free and tin-lead hand
soldering. Save on tip replacement cost, and improve product quality.
Also available as OVT-15C, for your own learning network.
Online Video Training (OVT)
Do-it-yourself video-based training for your learning network.
Computer-ready video files and free automated testing programs for
immediate use online; or testing programs for purchase to use in
conjunction with the video files on your LAN or intranet.
OVT-71C IPC-A-610E Common Inspection Errors
OVT-74C ESD Control for Electronics Assembly
OVT-PTH-E Through-Hole Solder Workmanship Standards
OVT-SMT-E Surface Mount Solder Workmanship Standards
OVT-18C Soldering Terminals
OVT-15C Soldering Iron Tip Care
OVT-8C Print Reading for Electronics Assembly
EDU Multi-Video Courses in OVT format
Our Educational EDU courses have now been transferred to the OVT (computer-based/learning network) format. Special discounts and certification, ideal for votech, job training and school-to-work programs – or useful for new hires to give them the fundamentals of Electronics Assembly technology. Even experienced operators can learn a lot from EDU-104, the advanced training program. Site or Global licenses.
EDU-101-OVT (Site) – Intro to Electronics Assembly
EDU-102-OVT (Site) – Surface Mount Assembly
EDU-103-OVT (Site) – Through Hole Assembly
EDU-104-OVT (Site) – Advanced Electronics Assembly
Training & Ref. Guides in PDF Format
Our best-selling Training & Reference Guides (DRMs) are now available in Adobe Acrobat (PDF) format. Allows for unlimited copies by Site (single facility) or Global (multi-facility) licenses. Create your own customized Booknotes or document hyperlinks – even add company-specific text to any page using the “sticky-note” function.
DRM-18H (Site PDF) – Component ID
DRM-PTH-E (Site PDF) – Through-Hole Solder Joint Evaluation
DRM-SMT-E (Site PDF) – Surface Mount Solder Joint Evaluation
DRM-WHA-A (Site PDF) – Wire Harness Assembly
Alternate Language Releases
Multi-Language (with English) DVD training programs.
DVD-SP18C Spanish – Soldering Terminals
DVD-CH8 Chinese – Print Reading for Electronics Assembly
DVD-FR15C French – Soldering Iron Tip Care
DVD-FR42C French – Hand Soldering for Through-Hole (Tin-Lead)
DVD-CH15C Chinese -- Soldering Iron Tip Care
DVD-SP15C Spanish -- Soldering Iron Tip Care
DVD-SP41C Spanish -- Through-Hole Rework
|
